Stove Repair Stove Repair in Sarasota, FL
Burner won’t light, won’t heat, clicks constantly or the controls aren’t responding? Find out what could be behind it and what to do next.
Gulf Crest Appliance Repair provides stove repair in Sarasota, FL for burners that will not ignite or heat, repeated clicking, uneven flame, unresponsive controls and surface elements that cycle incorrectly. The page separates gas ignition, electric element and control-system problems so the correct system can be tested.
Call (941) 205-2700
At a glance
Stove repair in Sarasota, FL depends first on whether the appliance uses gas or electricity. Gas problems commonly involve the burner assembly, igniter or spark module; electric problems may involve the surface element, receptacle or infinite switch; either type can also have wiring or control-board faults. Testing the affected burner and control path is more reliable than judging by the symptom alone.
Because different failures can look alike, such as a burner that won’t light because of a dirty burner port versus one that won’t light because of a failed spark module, diagnosis matters. Guessing at parts costs time and money.
What a technician checks first
Burner assembly & igniter (gas)
Spark module (gas)
Surface element & infinite switch (electric)
Wiring & terminal connectionsControl boardStove types and configurations
Gas and electric stoves work differently and fail differently. Tell us which type you have when you contact us.
| Configuration | What to know |
|---|---|
| Gas stove / range | Burners are lit by an igniter and spark module. Gas flows through a valve to each burner. Still needs electrical power for igniters and controls. |
| Electric stove / range | Uses surface elements, either coil or smooth-top, controlled by infinite switches or electronic controls. Typically runs on a dedicated high-voltage circuit. |
| Freestanding range | A stand-alone unit with finished sides, sitting between cabinets or standing alone. Includes the surface and an oven. |
| Slide-in range (where serviced) | Sits flush with the countertop, with controls at the front. Access and removal differ from freestanding models, so mention it when you call. |
Not sure what you have? The model number is usually on a label inside the oven frame, on the storage drawer frame or on the back panel.
Common stove symptoms
These are the problems that prompt most stove service calls.
Burner will not ignite
You turn the knob and hear clicking but the burner doesn’t light, or there’s no clicking at all.
Burner will not heat
On an electric stove, the element stays cold or barely warms, or only some elements work.
Continuous clicking
The igniter keeps clicking even after the burner is lit, or clicks without any knob turned.
Uneven flame
A gas flame that’s uneven, yellow-tipped, weak on one side or lifting from the burner.
Controls not responding
Knobs or touch controls don’t do anything, or work inconsistently.
Element cycles incorrectly
An electric element that turns on and off at odd intervals, stays at full heat or won’t hold a setting.
Symptom → possible cause table
This table lists possible causes only. A confirmed diagnosis requires an in-person inspection.
| Symptom | Possible causes | Components involved |
|---|---|---|
| Gas burner won’t light, no clicking | Spark module failure, power issue, control switch fault | Spark module, igniter switch |
| Gas burner clicks but won’t light | Dirty or wet burner, misaligned burner cap, weak igniter or spark, gas supply issue | Burner assembly, igniter, spark module |
| Continuous clicking | Wet or dirty igniter, stuck switch, burner cap misaligned | Igniter, igniter switch, spark module |
| One gas burner won’t light | Blocked burner ports, faulty igniter at that burner | Burner assembly, igniter |
| All gas burners won’t light | Spark module, power supply, gas supply | Spark module, power supply |
| Uneven or yellow flame | Clogged burner ports, misaligned cap, air-gas mixture issue | Burner assembly |
| Electric element won’t heat | Failed element, bad terminal connection, faulty infinite switch | Surface element, infinite switch, wiring |
| Element stays at full heat | Stuck or failed infinite switch | Infinite switch |
| Element cycles incorrectly | Switch fault, element fault, control problem | Infinite switch, surface element, control board |
| Only some elements work | Element failure, switch failure, wiring or terminal issue | Elements, switches, terminals |
| Controls not responding | Control board fault, switch failure, power issue | Control board, switches |
| Knob feels loose or won’t turn | Worn knob, damaged switch stem | Knob, switch |
| Element sparks or arcs | Damaged element, loose or burned terminal | Surface element, terminal connection |
| No power to the range | Tripped breaker, wiring fault, control issue | Breaker, wiring, control board |
Gas burner ignition problems
- Dirty or clogged burner ports, often from boil-overs or residue
- A wet burner or cap, from cleaning or spills
- A failed spark module, common when all burners are affected
Electric surface-element problems
Electric stoves heat with surface elements: exposed coils or radiant elements under a smooth glass-ceramic top.
| What you notice | Possible direction |
|---|---|
| One element cold, others work | That element, its switch or connection |
| Element always at full heat | Failed infinite switch |
| Element glows unevenly or sparks | Damaged element or connection |
Stove vs. oven repair scope
A range combines a cooking surface and an oven in one appliance. For repair, the surface and the oven are treated separately because they have different parts and symptoms.
| If your problem is… | Start with… |
|---|---|
| A burner won’t light or heat | This page, stove repair |
| A surface knob or control isn’t responding | This page, stove repair |
| The oven won’t heat, bake or broil | Oven Repair |
| A stand-alone cooktop, not part of a range | Cooktop Repair |
When clicking or flame problems need professional diagnosis
Signs to have it looked at
- Clicking that never stops, even after burners are lit or off
- A flame that’s consistently yellow, orange or lifting
- A burner that lights after a delay or with a small pop
- A gas smell, even faint
Safe homeowner checks
These checks are safe, take a few minutes and sometimes solve the problem. They’re not a diagnosis.
When to stop troubleshooting
- You smell gas or burning
- You see sparks or arcing at an element or terminal
- The glass surface is cracked or shattered
- The range is tripping the breaker, or a burner won’t shut off
Components commonly involved
| Component | What it does | Typical trouble signs |
|---|---|---|
| Burner assembly (gas) | Distributes gas and flame | Uneven flame, won’t light, soot |
| Igniter (gas) | Creates the spark to light the burner | Clicking without lighting, no spark |
| Spark module (gas) | Sends pulses to the igniters | No clicking, constant clicking |
| Surface element (electric) | Produces heat | Cold element, uneven heat, arcing |
| Infinite switch | Controls power to an element | Stuck on high, won’t heat, cycles oddly |
| Control board | Coordinates controls and displays | Unresponsive controls, error codes |
| Wiring / terminal connections | Carry power to switches and elements | Burned connections, intermittent heat, sparking |
| Knobs | User controls | Loose, won’t turn, misaligned |
Common repair categories
- Gas-ignition repairs: igniter, spark module and igniter switch
- Burner repairs: cleaning, alignment and replacement
- Element repairs: surface element replacement (electric)
- Switch repairs: infinite switch and burner switch
- Wiring and terminal repairs
- Control repairs: control board diagnosis and replacement
Stove repair process
What to expect during the appointment
Access: clear the area and remove pots, pans and grates from the surface.- Inspection: they’ll test the stove and may operate the burners; the range may need to be pulled out.
- Decision: no work should start until you understand the cause and cost.
Have your model and serial number ready, usually on a label on the oven frame, inside the storage drawer or on the back.
What affects repair cost
The failed part — a burner cap is a different repair than a control board.- Gas or electric — different surface components.
- The stove type, parts availability, age and access.
We work with many of the stove and range brands found in Sarasota homes. See the brands we service page. If you have a premium or professional-style range, tell us the brand and model so we can confirm before scheduling.
We don’t quote prices on this page because cost depends on the confirmed diagnosis.
Repair or replace?
Stove brands
We work with many of the stove and range brands found in Sarasota homes — see the brands we service page for the full list. If your brand isn’t listed, contact us with the brand and model and we’ll confirm before scheduling.
Stove repair in Sarasota: local context
Gulf Crest Appliance Repair provides stove repair throughout Sarasota from 8109 25th Ct E, Sarasota, FL 34243. Building access, appliance configuration and whether a range is gas or electric are useful local service details.
Gas or electric: what’s in your building
Condos often determine the kitchen fuel type. Check the model label or look for a gas line behind the range.
Moving a range
Ranges should be secured with an anti-tip bracket when put back — a job for a technician, not a DIY task.
Seasonal residences
Gas burners can collect dust or moisture over an idle stretch. Check that caps are seated and dry before your first use.
Popular service areas: Bradenton, Venice, Englewood and Lakewood Ranch.
Related appliance pages
- Oven Repair: for the oven cavity of your range
- Cooktop Repair: for stand-alone cooktops
- Range Hood Repair: for the hood above your cooking surface
Helpful guides
- Stove burner not igniting: what to check and what it may mean
Frequently asked questions
Why won’t my gas burner light?
Possible causes include a dirty or wet burner, a misaligned burner cap, a weak igniter, a failed spark module or a gas or power supply issue.
Why does my stove keep clicking?
Continuous clicking can be caused by a wet or dirty igniter, a stuck igniter switch or a misaligned burner cap.
Why is my gas flame yellow or uneven?
Possible causes include clogged burner ports, a misaligned cap or an air-gas mixture problem.
Why won’t my electric burner heat?
Possible causes include a failed surface element, a burned terminal connection or a faulty infinite switch.
Why does my burner stay on high?
A stuck or failed infinite switch is a possible cause. If a burner won’t shut off, turn off the breaker and call for service.
Why aren’t my stove controls responding?
Possible causes include a control lock, a failed switch or control board or a power issue.
Can I cook on a cracked glass stovetop?
It’s best not to. Cracks can let liquid reach live electrical parts, and the damage can spread.
Do you repair both gas and electric stoves?
Yes. Tell us which you have when you contact us.
Is stove repair the same as oven repair?
No. Stove repair covers burners, elements and surface controls. Oven problems are covered on our Oven Repair page.
Should I repair or replace my stove?
It depends on the cause, the stove’s age and the repair cost compared to replacement.
How much does stove repair cost?
Cost depends on the confirmed cause, the parts and the stove. We don’t quote prices here.
Do you service stoves outside Sarasota?
Yes, including Bradenton, Venice, Englewood and Lakewood Ranch.
Need your stove looked at?
Tell Gulf Crest Appliance Repair whether the stove is gas or electric, which burner is affected and what happens when you turn it on. Email support@applianceinsarasota.com.